新闻动态
芝麻灰路边石施工要求
a.路边石必须挂通线进行施工,按侧平面顶面示高标线绷紧,按线码砌侧平石,侧平石要安正,切忌前仰后合,侧面顶线顺直圆滑平顺,无高低错牙现象,平面无上下错台、内外错牙现象。
A. The roadside stones must be constructed by hanging a connecting line. The top surface of the side plane should be marked with elevation marks, and the side stones should be laid up according to the line code. The side stones should be kept in good order. The top line of the side should be straight, smooth and smooth. There are no high and low wrong teeth. There is no staggered platform and internal and external wrong teeth in the plane.
b.路边石必须座浆砌筑,座浆必须密实,严禁塞缝砌筑;
B. The roadside stone must be built with grouting, the grouting must be compact, and the stoppage joints must be strictly prohibited.
c.路边石接缝处错位不超过1mm;侧石和平石必须在中间均匀错缝。
C. The dislocation of the joints of roadside stones is not more than 1 mm; the joints of side stones and flat stones must be uniform in the middle.
d.路边石侧平石应保证尺寸和光洁度满足设计要求。外观美观,对弯道部分侧石应按设计半径专门加工弯道石,砌筑时保证线形流畅、圆顺、拼缝紧密。弧形侧石必须人工精凿后抛光处理。
D. Size and smoothness of flagstones should be guaranteed to meet the design requirements. Beautiful appearance, bend stone should be processed according to the design radius to ensure smooth alignment, smooth circle and tight joints when masonry. The arc sidestones must be polished after manual chiseling.
e.路边石后背应还土夯实,夯实宽度不小于50mm,厚度不小于15mm。
E. The back of roadside stones should be compacted with soil. The width of compaction should not be less than 50 mm and the thickness should not be less than 15 mm.
f.路边石勾缝:勾缝时必须再挂线,把侧石缝内的杂物剔除干净,用水润湿,然后用1:2.5水泥砂浆灌缝填实勾干。
F. Curb stone joints: When joints are jointed, thread must be hung again, debris in the side stone joints must be removed, wetted with water, and then filled with 1:2.5 cement mortar to dry.
g.路边石勾缝、安砌后适当浇水养护。
G. Proper watering and maintenance of roadside stone joints after erection.

联系方式

  1. 手机:13313028229

版权 © 保定模具加工厂 网址:mojuljs.37ix.com.cn  推荐:路肩石模具,塑料路边石模具,路肩石钢模具,路边石模具

友链:框格护坡模具 隔离墩钢模具 电缆槽模具