路沿石钢模具安装使用前应严格检查,清除脏物,检查模具的导向套和模具是否润滑良好。定期对冲床的转盘及模具安装底座进行检查,确保上下转盘的同轴精度。按照模具的安装程序将凸凹模在转盘上安装好,保证凸凹模具的方向一致,特别化粪池模具 精密铸造 钢纤维 盐水注射机 风电基础模具 nsk轴承经销商 nsk轴承总代理 保定空调移机是具有方向要求的路沿石钢模具更要用心,防止装错、装反。模具安装完后,应检查模具安装底座各紧固螺钉是否锁紧无误。冲床模具的凸模和凹模刃口磨损时应停止使用,及时刃磨,否则会迅速扩大模具刃口的磨损程度,加速模具磨损,降低冲件质量和模具寿命。对于批量生产所使用的通用模具,应有备份,以便轮换生产,保证生产所需。
Before installing and using the stone steel mould along the road, it should be strictly checked to remove dirt and check whether the guide sleeve and the mould are lubricated well. Periodically check the turntable and the mounting base of the die of the punch to ensure the coaxial accuracy of the upper and lower turntables. According to the installation procedure of the die, the punch and concave diewww.zhenkongfumoj.cnwww.biaozhiji.cn www.baojietangshan.cnwww.daxiaotou.com.cn www.yanglaoyuanl.cn www.diandongmenj.cn are installed on the turntable to ensure that the direction of the punch and concave die is the same. Especially along the road with the direction requirement, the stone steel die should be more careful to prevent the wrong loading and reverse loading. After the installation of the die, check whether the fastening screw of the installation base of the die is locked correctly. When the punch and die edges of punch die wear out, they should stop using and grind in time. Otherwise, the wear degree of the die edge will be expanded rapidly, the wear of the die will be accelerated, and the quality of the punch parts and the life of the die will be reduced. For general dies used in batch production, backups should be made in order to rotate production and ensure production requirements