新闻动态
路沿石模具在使用后
路沿石模具在使用后不要忘了要对模具进行一下“保养”，我们在清洗后一定要注意，一定要把水擦干净，放于通风干燥处，如果上面留下水迹，就会长锈长斑，干燥后建议涂抹上一层费油，这样既有利于钢模具的保护，而且在下次生产的时候，还利于脱模，生产出来的产品，表层也会更加的光滑。同时可以增加模具的使用寿命。
After using the stone mould along the road, don't forget to "maintain" the mould. After cleaning, we must pay attention to it. We must wipe the water clean and put it in the ventilated and dry place. If there are water marks left on it, it will grow rust and stains. After drying, we suggest smearing a layer of oil-consuming, which is beneficial to the protection of the steel mould, and also to the protection of the steel mould. In the next production, it is also conducive to demoulding, the product produced, the surface will be more smooth. At the same time, the service life of the die can be increased
After using the stone mould along the road, don't forget to "maintain" the mould. After cleaning, we must pay attention to it. We must wipe the water clean and put it in the ventilated and dry place. If there are water marks left on it, it will grow rust and stains. After drying, we suggest smearing a layer of oil-consuming, which is beneficial to the protection of the steel mould, and also to the protection of the steel mould. In the next production, it is also conducive to demoulding, the product produced, the surface will be more smooth. At the same time, the service life of the die can be increased
