新闻动态
模具零件裹面的组成
模具零件裹面的组成
Composition of coating surface of mold parts
组成模具的零件形状虽然各异,但构成每个零件的基本表面可概括为3种。
Although the shapes of the parts that make up the mold are different, the basic surfaces that make up each part can be summarized as three kinds.
(1)回转面零件的外圆面、内圆面、圆锥面等。
(1) Outer circular surface, inner circular surface, conical surface, etc. of revolving surface parts.
(2)平面板的表面和轴的端面等。
(2) The surface of the plane plate and the end face of the shaft, etc.
(3)曲面成形零件的二维曲保定平面设计培训 保定空调维修 保定管道通风 包装盒定做 化粪池模具 废旧电缆回收 不锈钢铸件面和三维曲面等。
(3) The two-dimensional surface and three-dimensional surface of surface forming parts.
模具零件成形的实质就是解决这3种基本表面的加工问题。对于回转面和平面通常采用传统的切削加工就可以成形,根据零件表面不同的精度要求和不同的材质可以选取不同的加工方案。
The essence of mold part forming is to solve the processing problems of these three basic surfaces. The rotary surface and plane can be formed by traditional machining. Different machining schemes can be selected according to different accuracy requirements and different materials of the part surfac

联系方式

  1. 手机:13313028229

版权 © 保定模具加工厂 网址:mojuljs.37ix.com.cn  推荐:路肩石模具,U型槽模板,路肩石钢模具,路边石模具

友链:收费岛模具 淤泥固化设备 框格护坡模具 隔离墩钢模具 电缆槽模具 隔离墩模具 U型槽钢模具 保定轻钢别墅