| 路肩石模具的前后内模,镶件,行位,斜顶,直顶(推块),铲鸡等需要在底面或者侧面上加工一个腰圆形的坑位,把材料名和硬度刻出来。行位斜导柱一定要压紧,不能转动和松动。斜导柱尾部必须要加工成半球形或者圆锥台形,有利于保证行位正常运动。同一行位上有两支或者两支以上斜导柱的,斜导柱的长度、大小和倾斜度必须相同。
Shoulder stone mold before and after the internal model, inserts, line,
inclined top, top (block), shovel chicken and other need to be on the
bottom or side processing with a circular hole, the material name and
hardness. The position of the diagonal guide must be pressed tightly,
which cannot be rotated and loosened. The end of the diagonal guide must
be processed into a semi-spherical or conical shape, which will help
ensure the normal movement of the line. The length, size, and slope of
the diagonal column must be the same as two or more diagonal guides in
the same row.
我国路肩石模具本就是走环保路线而出名。在注重于环保、节能的现如今,我国路肩石模具企业应首先深入贯彻、实施,从每一步做起,增强企业员工们的节能、环型托辊 吸水树脂 天津水处理设备 邯郸断桥铝门窗 唐山防水 检查井模具 沟盖板模具保意识,科学化管理模式,加大力度研究新型环保路肩石模具制造工艺、减少模具设计的报废率、降低模具生产时资源消耗量,只有这样路肩石模具才能继续持续造就环保之路否则必会被新型环保工艺取而代之。
China's road shoulder stone mold is known for its environmentally
friendly route. In focusing on environmental protection, energy saving
nowadays, our country shoulder stone mould enterprises should first
carry out, implement, starts from each step, the enhancement enterprise
staff's consciousness of energy-saving, environmental protection,
scientific management mode, intensify efforts to develop new green
shoulder stone mould manufacturing process, reduce scrap rate, reduce
the mold production mold design resource consumption, when only in this
way can shoulder stone moulds to continue to make environmental
protection path or will be the new environmental protection process
instea |